Add to Wishlist

Skyline HNR32 / HR33 HR34 / ER33 ER34 / ENR33 ENR 34 / ECR33 / – Silvia S14 ( 97-98) / S15 2 Way – SAN2745

$1,058.25 – $1,168.75

  • Part# SAN2745
  • SEE APPLICATION CHART
  • 20 Plates for medium to high power levels
  • 2 way
  • 30 Spline
  • Rear Differential
  • Fits cars equipped with factory LSD option
  • Rear carrier bearings pressed on
  • Rear cover gasket and axle oil seals included
  • 2L Gear oil included
  • Super Q option available (2-3 days lead-time)
SKU: N/A Categories: ,

*This is for a 30 Spline Axle Flange.  For 29 Spline Kouki S14 use part# SAN2635  – Late model S14 please be sure to check spline count before ordering.

* Included- Rear carrier bearings pressed on, Rear cover gasket, Axle oil seals and 2L Gear oil.

2.0-way LSD

Favored especially in drifting, a 2.0-way LSD delivers the same lockup characteristics under both acceleration and deceleration. Although this setup isn’t forgiving for street driving, it is preferred for drifting as it eases the car’s ability to break traction under braking.

SuperQ (WPC treatment)

Every Kaaz limited-slip differential is offered in a SuperQ variant. SuperQ units feature reduced chattering and smoother engagement for an enhanced driving experience. With the help of WPC metal treatment, SuperQ limited-slip differentials also come with better heat dissipation and longer wear life with no break-in process required. Just like all of Kaaz’s limited-slip differentials, SuperQ units allow for locking rate adjustments.

This part number fits the following applications:

Make YEAR TRIM MODEL ENGINE M/T POSITION FACTORY DIFF
Skyline 89-93 HNR32 GTS4 RB20DET MT/AT REAR VISCOUS
Skyline 96-98 HR33 GTS RB20E MT/AT REAR VISCOUS
Skyline 96-98 ER33 GTS25(ALL) RB25DE MT/AT REAR VISCOUS
Skyline 96-98 ENR33 GTS4 RB25DE MT/AT REAR VISCOUS
Skyline 98-01 HR34 GT RB20DE MT/AT REAR VISCOUS
Skyline 98-01 ER34 25GT RB25DE MT/AT REAR VISCOUS
Skyline 98-99 ER34 25GT TURBO RB25DET MT/AT REAR VISCOUS
Skyline 99-01 ER34 25GT TURBO RB25DET AT REAR VISCOUS
Skyline 98-01 ENR34 25GT FOUR RB25DE MT/AT REAR VISCOUS
Silvia 96-99 S14 Q’s SR20DE MT/AT REAR VISCOUS
Silvia 96-99 S14 K’s SR20DET MT REAR VISCOUS
Silvia 99-02 S15 SPEC S SR20DE MT/AT REAR VISCOUS
Silvia 99-02 S15 SPEC R SR20DET AT REAR VISCOUS
180SX 96-98 RPS13 TYPE S SR20DE MT/AT REAR VISCOUS
180SX 96-98 RPS13 TYPE X・R SR20DET MT/AT REAR VISCOUS
Cima FGY32 VG30DET VISCOUS
Laurel 96-97 HC34 RB20E AT REAR VISCOUS
Laurel 96-97 GC34 RB25DE AT REAR VISCOUS
Laurel 96-97 GC34 TURBO RB25DET AT REAR VISCOUS
Laurel 96-97 SC34 RD28 MT/AT REAR VISCOUS
Laurel 96-97 GNC34 4WD RB25DE AT REAR VISCOUS
Laurel 97-02 GC35 RB25DE AT REAR VISCOUS
Laurel 97-02 GC35 TURBO RB25DET AT REAR VISCOUS
Laurel 97-02 SC35 RD28 AT REAR VISCOUS
Laurel 97-02 GNC35 4WD RB25DE AT REAR VISCOUS
Cedric / Gloria 91-95 Y32 VG30DET AT REAR VISCOUS
Cedric / Gloria 95-99 Y33 VQ30DE AT REAR VISCOUS
Cedric / Gloria 95-99 Y33 VQ30DET AT REAR VISCOUS

Technical Information

KAAZ differentials are designed and engineered to be used in competition motorsports. They are supplied from the factory to react quickly and strongly when it reaches the ex-factory preload (100% Locking). This is ideal for smooth, dry tarmac circuit use.

For some drivers/ conditions, a “softer” setting may be required. There are several ways this can be achieved, but the general option is by reducing the amount of friction surfaces. By re-arranging the order of the plates, various options are available depending on the total number of plates in the differential.

The diagram below shows the stacking option for your application. The differential has the same number of plates on both sides and the plate configuration MUST be the same on both. Below shows just one side.

*The original quantity of plates must be retained, as well as the Belleville (cone) spring washer(s)